Results 1 to 19 of 19
-
01-27-2013, 06:04 AM #1
Supporting Vendor
- Join Date
- Jul 2010
- Location
- Encino,CA
- Posts
- 9,962
- Rep Points
- 8,426.4
- Mentioned
- 311 Post(s)
- Rep Power
- 85
3 out of 3 members liked this post.
Reputation
Cobalt SS VS RB turbo 335, C63 BS, 135 FBO,335is FBO, C63
Sup guys, I met up with some locals and had a few runs in Mexico. Unfortunately my camera mount messed up and let the camera just hang at an angle without anything. So I will just have to tell you the outcome and what each car had.
RB turbo 335,raced about 3-4 times from 50 roll.I lost,he kept pulling about 3 cars when we went to 140.
C63 Black series, raced 3 times 50 roll. I pulled a car on each run.
135 FBO e85, raced once I believe we were even but it was only 50-100.
335is FBO, raced twice, I pulled about 2 cars on him each time. I have that on video LOL.
C63 AMG P31 package I believe, raced once or twice and I put about 2 cars on him as well.
It was a great night, I think I could have done better considering the roads were a little wet. As well as getting a better mixture of Ethanol/91. I kept getting KR up top I never did before. Anyways, here are some pics cause I ain't no bullshitter!
Last edited by Payam@BMS; 01-27-2013 at 06:09 AM.
Burger Motorsports
Home of the Worlds fastest N20s, N54s, N55s, S55s, N63s, and S63s!
It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
-
01-27-2013, 10:02 AM #2
Timeout
- Join Date
- Feb 2010
- Location
- NJ
- Posts
- 13,412
- Rep Points
- 58.0
- Mentioned
- 318 Post(s)
- Rep Power
- 0
Reputation
how the $#@! you racing in the snow?
-
01-27-2013, 12:09 PM #3
Member
- Join Date
- Feb 2010
- Location
- Downey, Ca
- Posts
- 2,070
- Rep Points
- 2,908.0
- Mentioned
- 62 Post(s)
- Rep Power
- 30
1 out of 1 members liked this post. Reputation
It don't snow in So. Cal.
-
01-27-2013, 12:15 PM #4
Member
- Join Date
- Oct 2012
- Location
- West Suburbs
- Posts
- 959
- Rep Points
- 303.8
- Mentioned
- 4 Post(s)
- Rep Power
- 4
Reputation
How much Hp do you put down? Thought I recall seeing 430 at one point
-
01-27-2013, 01:04 PM #5
Supporting Vendor
- Join Date
- Jul 2010
- Location
- Encino,CA
- Posts
- 9,962
- Rep Points
- 8,426.4
- Mentioned
- 311 Post(s)
- Rep Power
- 85
Reputation
Nah, no snow. Just foggy at some points of the night.
Originally Posted by LostMarine
415whp 435 wtq. Originally Posted by Markyd83
Burger Motorsports
Home of the Worlds fastest N20s, N54s, N55s, S55s, N63s, and S63s!
It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
-
01-27-2013, 01:25 PM #6
Timeout
- Join Date
- Feb 2010
- Location
- NJ
- Posts
- 13,412
- Rep Points
- 58.0
- Mentioned
- 318 Post(s)
- Rep Power
- 0
Reputation
lol, i figured. I REALLY REALLY wish there was video
-
01-27-2013, 01:47 PM #7
Member
- Join Date
- Feb 2010
- Posts
- 29
- Rep Points
- 110.6
- Mentioned
- 2 Post(s)
- Rep Power
- 2
2 out of 2 members liked this post. Reputation
the 335is took videos, Im sure he'll post them today.
335is was on e30 Cobb Protune
I was on e50ish BMS Flash and all cars except 135 and cobalt had a passenger.
-
01-27-2013, 02:49 PM #8
Member
- Join Date
- Dec 2011
- Location
- Roanoke VA
- Posts
- 1,632
- Rep Points
- 2,275.3
- Mentioned
- 54 Post(s)
- Rep Power
- 23
Reputation
I assume you're "sick335" on e90post? Originally Posted by SFvalley335i
Welcome to BimmerBoost
MOTIV750, MOTIV P-1000 PI, MOTIV/FUEL-IT! low pressure fuel system, AEM EMS/COBB AP, Aquamist HFS-3, ETS FMIC, SPEC stage 3+ clutch/SS flywheel, BC Racing coilovers and VMR wheels wrapped in Hankook RS3s.
-
01-27-2013, 03:09 PM #9
Member
- Join Date
- Feb 2010
- Posts
- 29
- Rep Points
- 110.6
- Mentioned
- 2 Post(s)
- Rep Power
- 2
1 out of 1 members liked this post. Reputation
Nope, im SFvalley335i on the forums... I drove the 135i mentioned above... Thanks for the welcome, Ive been on here since it launched but never really posted. Originally Posted by rader1
I assume you're "sick335" on e90post?
Welcome to BimmerBoost
-
01-27-2013, 05:16 PM #10
Supporting Vendor
- Join Date
- Jul 2010
- Location
- Encino,CA
- Posts
- 9,962
- Rep Points
- 8,426.4
- Mentioned
- 311 Post(s)
- Rep Power
- 85
Reputation
All great guys btw. We need to do this more often!
Burger Motorsports
Home of the Worlds fastest N20s, N54s, N55s, S55s, N63s, and S63s!
It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
-
01-27-2013, 05:20 PM #11
Member
- Join Date
- Feb 2010
- Location
- Downey, Ca
- Posts
- 2,070
- Rep Points
- 2,908.0
- Mentioned
- 62 Post(s)
- Rep Power
- 30
Reputation
Thanks for the invite. Originally Posted by fastgti69
-
01-27-2013, 05:31 PM #12
Member
- Join Date
- Jan 2013
- Posts
- 148
- Rep Points
- 219.2
- Mentioned
- 12 Post(s)
- Rep Power
- 3
Reputation
That Chevy is in some pretty good company! Nicely done.
-
01-27-2013, 09:06 PM #13
Member
- Join Date
- Feb 2010
- Posts
- 29
- Rep Points
- 110.6
- Mentioned
- 2 Post(s)
- Rep Power
- 2
Reputation
Heres a OK video I took, doesn't show too much.
-
01-27-2013, 09:43 PM #14
Timeout
- Join Date
- Feb 2010
- Location
- NJ
- Posts
- 13,412
- Rep Points
- 58.0
- Mentioned
- 318 Post(s)
- Rep Power
- 0
1 out of 1 members liked this post. Reputation
I appreciate the effort, but hate chase videos, they never show anything
-
01-28-2013, 02:58 AM #15
Supporting Vendor
- Join Date
- Jul 2010
- Location
- Encino,CA
- Posts
- 9,962
- Rep Points
- 8,426.4
- Mentioned
- 311 Post(s)
- Rep Power
- 85
Reputation
Hell yea! Thank you for the vid!!!
Burger Motorsports
Home of the Worlds fastest N20s, N54s, N55s, S55s, N63s, and S63s!
It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
-
01-28-2013, 03:24 AM #16
Supporting Vendor
- Join Date
- Jul 2010
- Location
- Encino,CA
- Posts
- 9,962
- Rep Points
- 8,426.4
- Mentioned
- 311 Post(s)
- Rep Power
- 85
Reputation
Sorry brotha, it was a rainy night and i wasn't expecting to run at all! It was a last minute call I got off work and met up with them. You know you're in next run. Originally Posted by alpinedevil335
Thanks for the invite.Burger Motorsports
Home of the Worlds fastest N20s, N54s, N55s, S55s, N63s, and S63s!
It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
-
01-29-2013, 12:51 PM #17
Member
- Join Date
- Jan 2013
- Posts
- 80
- Rep Points
- 105.0
- Mentioned
- 3 Post(s)
- Rep Power
- 2
Reputation
Nice dude. Taking out some big dogs. I'm surprised you didn't hang with the RB car better. Your cobalt is really quick.
- 2010 Volkswagen GTI (2.0T).
- Borg Warner EFR-7163.
- 3" TBE/FMIC/Injectors.
- Eurodyne Maestro 7 & Eurodyne Boost Manager Plus.
- Methanol Injection.
-
01-29-2013, 01:29 PM #18
Supporting Vendor
- Join Date
- Jul 2010
- Location
- Encino,CA
- Posts
- 9,962
- Rep Points
- 8,426.4
- Mentioned
- 311 Post(s)
- Rep Power
- 85
Reputation
Had a bad mix of e85 and 91. My car should have performed a little better. No worries though, we will meet again! This time I'll have my mount unmovable lol Originally Posted by zhijjawi10
Burger Motorsports
Home of the Worlds fastest N20s, N54s, N55s, S55s, N63s, and S63s!
It is the sole responsibility of the purchaser and installer of any BMS part to employ the correct installation techniques required to ensure the proper operation of BMS parts, and BMS disclaims any and all liability for any part failure due to improper installation or use. It is the sole responsibility of the customer to verify that the use of their vehicle and items purchased comply with federal, state and local regulations. BMS claims no legal federal, state or local certification concerning pollution controlled motor vehicles or mandated emissions requirements. BMS products labeled for use only in competition racing vehicles may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event, in accordance with all federal and state laws, and may never be operated on public roads/highways. Please click here for more information on legal requirements related to use of BMS parts.
-
01-30-2013, 09:02 PM #19
Member
- Join Date
- Jan 2013
- Posts
- 80
- Rep Points
- 105.0
- Mentioned
- 3 Post(s)
- Rep Power
- 2
Reputation
Yeah get some good video's next time... Originally Posted by fastgti69
- 2010 Volkswagen GTI (2.0T).
- Borg Warner EFR-7163.
- 3" TBE/FMIC/Injectors.
- Eurodyne Maestro 7 & Eurodyne Boost Manager Plus.
- Methanol Injection.
Quote
Welcome Haldi,...
Let's point and laugh at Haldi